BZDLD - E870 ELMER'S TILE GROUT-ACRYLIC LATEX
- MSDS: BZDLD
- Manufacturer: BORDEN INC CONSUMER PACKAGED PRODUCT DIV
- Product Name: E870 ELMER'S TILE GROUT-ACRYLIC LATEX
- National Stock Number: 8030-00F047816
Product Identification
Product ID:E870 ELMER'S TILE GROUT-ACRYLIC LATEX
MSDS Date:02/06/1994
FSC:8030
NIIN:00F047816
MSDS Number: BZDLD
Responsible Party
COLUMBUS, OH 43215-3799
US
Emergency Phone: 800-848-9400/614-431-6680
Info Phone: 614-431-6680/800-848-9400
Cage: 02LY3
Contractor
Telephone: 614-431-6680/800-848-9400
Cage: 02LY3
Ingredients
CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING *96-1*
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: >70%
ACGIH TLV: 10 MG/CUM (DUST)
CRYSTALLINE-QUARTZ SILICA, SILICA DUST (SUSPECTED HUMAN
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 0.1-1%
OSHA PEL 10 MG/CUM %RESP SIO2
ACGIH TLV: 0.1 MG/CUM RESP DUST
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: NON-TOXIC, MAY CAUSE IRRITATION
ON PROLONGED/REPEATED CONTACT. INGESTION: NON-TOXIC. INHALATION: IF
AIRBORNE, MAY CAUSE IRRITATION OF NOSE, THROAT & LUNGS. NON-TOXIC.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:PRE-EXISTING RESPIRATORY DISORDERS.
First Aid
First Aid:INGESTION: DILUTE BY DRINKING LARGE QUANTITIES OF WATER.
INHALATION: REMOVE TO FRESH AIR. SKIN: FLUSH W/WATER. EYES:
IMMEDIATELY FLUSH W/PLENTY OF WATER. OBTAIN MEDICAL ATTENTION IN
ALL CASES.
Fire Fighting
Extinguishing Media:WATER
Fire Fighting Procedures:IN CASE OF FIRE, WATER SHOULD BE USED TO KEEP
FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:WILL NOT BURN UNLESS WATER HAS
EVAPORATED.
Accidental Release
Spill Release Procedures:SWEEP/SCOOP UP & REMOVE TO A CHEMICAL DISPOSAL
AREA. PREVENT ENTRY INTO NATURAL BODIES OF WATER.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. STORE IN A COOL,
DRY PLACE. KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:AVOID PROLONGED/REPEATED BREATHING OF VAPOR. PERSONS
AVOID CONTACT W/SENSITIVE SKIN. AVOID EXPOSURE & REMOVAL OF
MATERIAL FROM EYES, SKIN & CLOTHING.
Exposure Controls
Respiratory Protection:NO SPECIAL PROTECTION NECESSARY.
Ventilation:SUFFICIENT IN VOLUME & AIR FLOW SHOULD BE PROVIDED TO KEEP
AIR CONCENTRATION LEVELS BELOW ACCEPTABLE CRITERIA.
Protective Gloves:NO SPECIAL PROTECTION NECESSARY
Eye Protection:NO SPECIAL PROTECTION NECESSARY
Other Protective Equipment:NO SPECIAL PROTECTION NECESSARY.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Melt/Freeze Pt:M.P/F.P Text:32F
Vapor Pres:17
Vapor Density:<1
Spec Gravity:1.83
pH:9.1
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:DISPERSIBLE
Appearance and Odor:OFF-WHITE PUTTY W/MILD ACRYLIC AROMA
Percent Volatiles by Volume:13
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS
Stability Condition to Avoid:FREEZING
Hazardous Decomposition Products:OXIDES OF CARBON
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.